Get 20% off by using code: flat20 **

Ebco Full Panel with 6mm Bottom Track - FPDS - Set of 4 Pcs

Continue Shopping or Checkout


 

  • FULL PANEL WITH 6MM BOTTOM TRACK
    Code Numbers / Height Length
    mm
    Extension
    mm
    Finish
    54 86 125 150
    FPDS 54 30-6 FPDS 86 30-6 FPDS 125 30-6 FPDS 150 30-6 300 225  Ivory
    FPDS 54 35-6 FPDS 86 35-6 FPDS 125 35-6 FPDS 150 35-6 350 275
    FPDS 54 37-6 FPDS 86 37-6 FPDS 125 37-6 FPDS 150 37-6 375 300
    FPDS 54 40-6 FPDS 86 40-6 FPDS 125 40-6 FPDS 150 40-6 400 325
    FPDS 54 45-6 FPDS 86 45-6 FPDS 125 45-6 FPDS 150 45-6 450 375
    FPDS 54 50-6 FPDS 86 50-6 FPDS 125 50-6 FPDS 150 50-6 500 425
    FPDS 54 52-6 FPDS 86 52-6 FPDS 125 52-6 FPDS 150 52-6 525 450
    FPDS 54 55-6 FPDS 86 55-6 FPDS 125 55-6 FPDS 150 55-6 550 475




    (mm)

    (mm)

    (mm)

    (mm)
    54 71 52 32
    86 103 84 64
    125 142 123 96
    150 167 148 96

    *If you have any specific question related to the product, please contact us.

  • Special Features 
    1. Simplifies construction of drawer as it eliminates the sides of drawer.
    2. Saves wood, labour, drawer space, time and cost, which enhances bulk production.
    3. Tilt and remove capability with guiding
    4. Auto closing of drawer.
    5. Front fascia height adjustment cams provided in 86mm & 125mm height Full Panels with 6mm bottom track.
    6. Ribbed for strength.
    7. Precision rollers for smooth running.
    8. Load capability - 25 kgs.
    9. "System 32" compatible.
    10. Stopper prevents drawer from falling.
    11. Also available with 6 mm bottom track easy to fit and helps in faster assembly, as it does not require screwing the bottom, using 6 mm board in place of 9 mm or 12 mm.
  • Fitting Instructions
    1. Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
    2. Clearance of 25mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
    3. Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
    4. Screws should be recessed to avoid fouling.
    5. Fixed slides should be fitted parallel and at equal height to each other.
    6. Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.

    Caution
    1. Strictly maintain side gap of 15.5 mm per side.
    2. Fix slides parallel and at equal height.
    3. Do not apply paint or polish.
  • As per store shipping policy.
  • For VOLUMETRIC WEIGHT.

 

 

 


Related Items


Top