Rs. 1,600.00
| Specification | Godrej Cylindrical Locks (Entrance) |
|---|---|
| Finish | Polished Brass & Stainless Steel |
*If you have any specific question related to the product, please contact us.
Godrej Cylindrical Lock (Entrance). All the components are made of sheet metal, which give greater strength. Pin cylinder mechanism in brass. To lock, press the inside push-button and close the door. To unlock from inside, rotate the inside knob. To unlock from outside when push button is pressed, use key.
This Godrej Cylindrical Lock is available in Polished Brass & Stainless Steel finish. The Knobs are made up of high-grade Stainless Steel/Brass depending upon the model and have high quality of top plating of the said finish. A Round Shaped Cylindrical Lock with Pin Cylinder Mechanism.
Features include :
- A spring loaded latch for push closing.
- Automatic deadlocking for extra safety.
- Easy push-button facility for locking from inside.
- Emergency Opening from outside is also provided.
If you have to customize a finish according to your choice please contact us we have more than ten finishes of every product.
These Cylindrical locks are very useful for Entrance Doors for residential and commercial establishments as this enables the end user to close the doors quickly without the use of a key to limit access. Can also be used for Kitchen or Store Room doors where a quick close is required along with security. Can be used in wood, plywood or timber doors. Installation of this Door Hardware is simple and quick.
As per store shipping policy.
Godrej provides 5 years warranty on their products from the date of its purchase for any sort of manufacturing defects. The warranty does not cover any defect arising out of the following:-
To read more about warranty click here.
Rs. 699.00
Rs. 1,092.00
| Item | Type | Code Nos. | Finish |
| Computer Keyboard Tray | With Mouse Tray | KBT35M | Black Texture |
| Computer Keyboard Tray | Without Mouse Tray | KBT35 | Black Texture |
*If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.
Assemble height adjustment brackets on to slides using M4 screw provided as in Fig. 1
2. Drill as per drilling diagram Fig. 2
3. Height adjustment bracket should be adjusted for desired height.
4. Screw the keyboard tray onto the table. Table should have minimum horizontal gap of 600mm.
5. Slide the keyboard tray out till it automatically latches.
6. To remove tray lift ltaches provided on each sides and pull as per Fig. 3.
Rs. 746.00
CPU Stand - ECO CPUS E1 Set of
C.P.U. Stand for storage of C.P.U. Unit just under the table.
This saves a lot of space in the table.
Vibration pad are installed for the safety of your CPU unit.
Width adjustment: 100-205 Max Load 12 kg
Rs. 976.00
| Item | Code | Size (mm) | Finish |
| Door Stiffener HD | DSTF2-HD | 2010 | Grey |
Fitting Instructions
1. Slotting dimension requirement Use two sets when
door width is more than 600mm
2. Straightener length cutting specification (When door
height is 1000-2200mm）
3. Put nut into the straightener, and then adjust the and
put it into the slot. Locking screws at both ends of
straightener, screws shall be of same height.
4. Tighten the regulator with screws, and lock the plastic
decorative covers with screws at the same time.
5. Use the rob to align the door until it is straight,
put the decorative cover onto to the regulator.
Subscribe to our newsletter and always be the first to hear about what is happening.
