*If you have any specific question related to the product, please contact us.
Special Features
A unique new way to assemble a drawer by clipping on a matching back panel.
This not only improves the look of the drawer but also saves valuable time during assembly and brings down cost.
Tilt and remove capability with guiding.
Auto closing of drawer
Front fascia adjustment.
Precision rollers for smooth running.
'System 32' compatible.
Fitting Instructions
Side gap of 15.5mm is required and acts as side panel of drawer (Fig.1).
Eccentric Cam for front facia height adjustment provided in 86mm and 125mm height Full Panels with 6mm bottom track (Ref. Fig 2)
25.4mm clearance from top edge of drawer required to tilt and remove drawer (Refer Fig. 2).
Fixed slide should be set by 2mm for 'Auto-Closing' (Fig. 2).
Screws should be recessed to avoid fouling.
Fixed slides should be fitted parallel and at equal heights to each other.
Insert the Rear panel onto the Side panels through the key slot provided in the side panels (Ref. Fig.3).
Place the bottom flap through the track provided in the Side panels and fix the front facia with the Bracket and insert the unit onto fixed slides which are fitted internal sides of cabinet (Ref. Fig.4).
*If you have any specific question related to the product, please contact us.
Special Features
Special raised rear panel is ideal for filing cabinets.
A unique new way to assemble a drawer by clipping on a matching back panel.
This not only improves the look of the drawer but also saves valuable time during assembly and brings down cost.
Tilt and remove capability with guiding.
Auto closing of drawer.
Precision rollers for smooth running.
'System 32' Compatible.
Available with eccentric cam for fascia height adjustment in 86mm & 125mm height Full Panels.
Fitting Instructions
Side gap of 15.5mm is required and acts as side panel of drawer (Fig. 1).
Fixed slide should be set by 2mm for 'Auto-closing' (Fig. 2).
Screws should be recessed to avoid fouling.
Fixed slides should be fitted parallel and at equal heights to each other.
Insert the raised rear panel on to the side panels through the key slot provided in the side panels (Ref. Fig.3).
Slide the 6mm bottom panel through the tracks provided in the side panels. (Ref. Fig. 4).
Connect the cross rods by using T-connectors as shown in diagram (Ref. Fig. 5).
Screw the font facia with side panels and insert the dowel in to the Ø8mm hole made in front facia, screw the side rods in to the dowels (Ref. Fig. 6). Push the other end of the rod in to the plastic sleeve fitted on the raised rear panel (Ref. Fig. 7).
Eccentric cam for front fascia height adjustment provided in 86mm & 125mm height Full Panels. (Ref. Fig . 2)
*If you have any specific question related to the product, please contact us.
Special Features
Simplifies construction of drawer as it eliminates the sides of drawer.
Saves wood, labour, drawer space, time and cost, which enhances bulk production.
Tilt and remove capability with guiding
Auto closing of drawer.
Front fascia height adjustment cams provided in 86mm & 125mm height Full Panels with 6mm bottom track.
Ribbed for strength.
Precision rollers for smooth running.
Load capability - 25 kgs.
"System 32" compatible.
Stopper prevents drawer from falling.
Also available with 6 mm bottom track easy to fit and helps in faster assembly, as it does not require screwing the bottom, using 6 mm board in place of 9 mm or 12 mm.
Fitting Instructions
Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
Clearance of 25mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
Screws should be recessed to avoid fouling.
Fixed slides should be fitted parallel and at equal height to each other.
Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.
*If you have any specific question related to the product, please contact us.
To install sleek telescopic drawer slide soft close 12.7 to13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
*If you have any specific question related to the product, please contact us.
To install sleek telescopic drawer slide 12.7 to 13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
*If you have any specific question related to the product, please contact us.
To install sleek telescopic drawer slide 12.7 to 13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
*If you have any specific question related to the product, please contact us.
To install sleek telescopic drawer slide 12.7 to 13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.
Godrej Drawer Channels. Heavy Duty Telescopic Drawer Channel. Available in sizes 10", 12", 14", 16", 18", 20", 22" and 24". Price listed are for set.The size listed are in inches (in/")
Ideal for Furniture Drawers. It can be used for Drawers in Kitchen also. Price listed for a set.
Godrej Drawer Channels. Heavy Duty Telescopic Drawer Channel. Available in sizes 10", 12", 14", 16", 18", 20", 22" and 24". Price listed are for set.The size listed are in inches (in/")
Ideal for Furniture Drawers. It can be used for Drawers in Kitchen also. Price listed for a set.
Features • Heavy duty application • Load bearing capacity up to 125 kg • Full extension of drawer for ease in storage • Latch for easy removal of drawer • Zinc plated for better corrosion resistance
Ideal for Furniture Drawers. It can be used for Drawers in Kitchen also. Price listed for a set.
Features • Precision mechanism for smooth operation • Special Anti rebound function • Load bearing capacity up to 35 kg • Latch for easy removal of drawer • Zinc plated for better corrosion resistance
Ideal for Furniture Drawers. It can be used for Drawers in Kitchen also. Price listed for a set.
Krome Heavy Duty Telescopic Channel. Heavy Duty Telescopic Drawer Channel. Available in sizes 18",20", 22", 26", 28", 30", 32", 34"and 36". Price listed are for set.The size listed are in inches (in/")
Ideal for Furniture Drawers. It can be used for Drawers in Kitchen also. Price listed for a set.
Krome Slides Telescopic Channel. Telescopic Channel. Available in sizes 10", 12", 14", 16",18",20", 22", 26", 28" and 30". Price listed are for set.The size listed are in inches (in/")
Ideal for Furniture Drawers. It can be used for Drawers in Kitchen also. Price listed for a set.
Krome Soft Closing Telescopic Channel. Soft Closing Telescopic Channel. Available in sizes of 12",16", 20" and 22". Price listed are for set.The size listed are in inches (in/")
Ideal for Kitchen Drawers. It can be used for Drawers of all kind of furnitures. Price listed for a set.