Ebco Push Open Fitting Magnetic Recessed (38mm Stroke)
Rs. 96.00
Ebco Push Open Fitting Magnetic Recessed (38mm Stroke)
Effortless opening
Ideal for handle-less furniture
Adjustment range of 6mm
Compact and recessed fitting for minimal visibility
Retrofit on existing furniture with drill hole Ø10mm, 70mm deep
Push force: 2.5kg
The Ebco Push Open Fitting Magnetic Recessed (38mm Stroke) is a type of hardware that allows you to open and close cabinet doors and drawers without using handles. It is a recessed fitting, which means that it is installed inside the cabinet or furniture piece so that it is not visible from the outside. The fitting has a magnetic actuator that is activated when you push on the door or drawer. This causes the door or drawer to open smoothly and quietly. The fitting is available in a variety of finishes to match your cabinetry or furniture.
Here are some of the benefits of using the Ebco Push Open Fitting Magnetic Recessed (38mm Stroke):
Sleek, unobtrusive design:The recessed fitting is installed inside the cabinet or furniture piece so that it is not visible from the outside. This gives the furniture a clean, modern look.
Easy to use:The fitting is activated by simply pushing on the door or drawer. This makes it easy to open and close the cabinet or furniture piece, especially for people with limited mobility.
Quiet operation:The fitting opens and closes smoothly and quietly. This is helpful for preventing noise and disturbance, especially in homes with young children or pets.
Durable:The fitting is made from high-quality materials and is designed to last. It can withstand the daily use and wear of a busy household.
If you are looking for a stylish, functional, and durable way to open and close your cabinet doors and drawers, the Ebco Push Open Fitting Magnetic Recessed (38mm Stroke) is a great option.
Here are some additional details about the fitting:
EBCO Push Open Hinges (With magnetic push open fittings) HPO-POM
Rs. 204.00
DESCRIPTION
This new hinge with special reverse spring enables automatic opening of door by exerting small amount of pressure to the door.
Available in Full Overlay, Half Overlay and Inset. For shutter thickness of 16mm to 19mm
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Hinge - Full Overlay
HPO1-POM
35
NP
Hinge - Half Overlay
HPO2-POM
35
NP
Hinge - Inset
HPO3-POM
35
NP
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
