Ebco.in Hardware Solution - KnobsKart.com, Flat 20% off, FLAT20

Ebco Pro-lift (GAS LIFT) (For Bed Fittings)

Rs. 1,138.00

Ideal for storage under bed.
Special gas spring available in three loads.
30° opening angle allows easy access.
Easy to lift (with the weight of top board) with minimum force.
Easy access as the gas lift keeps the bed top stay.
Long brackets provided for better support to the bed platform.

Specification
Fitting Instructions

Specification

Specification

Finish Silver

Pcs./set Pair

*If you have any specific question related to the product, please contact us.
1. Fit the Fix Brackets on bed frame as per given dimension. (Ref. Fig.1) without the gas spring fitted.
2. Now fix the bed platform to the top brackets. (Ref. Fig.2).
3. Lastly fit gas spring as shown in diagram (ref. Fig.3).
*Special Note:

Installation dimension are only recommendation and will vary depending on type of construction design.

Specification
Finish	Silver
Pcs./set	Pair

View full product details »

Ebco Bed Clamp BC4 Set of 8pcs

Rs. 119.00

Manufactured out of steel for strength
Clips easily in to each other forming a strong joint
Require four joints to form a bed frame.

Finish is Zinc Plated.

View full product details »

Ebco Keyboard Tray KBTC 35M Black with Mouse

Rs. 876.00

Ebco Keyboard Tray KBTC 35M Black with Mouse

Simple and cost effective design.

Height adjustment on mounting bracket.

Direct front installation.

Specially designed with full extension slide.

Smooth quite movement with ball bearings.

Soft palm provided to prevent fatigue while working.

Locks at extended position.

Max load 12 Kgs.

View full product details »

Ebco Bottom Mounting Drawer Slides - BMDS

Rs. 132.00

Special Features

New smooth silent roller system.
Right side pair has lateral guiding.
Left side pair has side gap adjustment.
Tilt and remove drawer.
Stopper to prevent drawer from falling.
New "Auto-Closing" feature of drawer.
"System-32" Compatible.
Ribs provided for strength.
Load capability - 20 Kgs.

Fitting Instructions

Side gap of 12.7 mm (1/2") per side required (Refer fig. 1).
25.4 mm (1") clearance from top edge of drawer required to tilt and remove drawer (Refer fig. 2).
Fixed and moving slide should be equally offset by 2 mm for Auto-Closing (Refer fig. 2).
Recess screw heads to avoid interference.
A set of slides must be fitted parallel and at same heights to each other.

Finish

Ivory
Brown
Black

View full product details »

Quantity

Continue Shopping or Checkout

Ebco Pro-Lift Bed Fittings (w/o Gas Lifts) PLBF

Rs. 1,020.00

Ideal for storage under bed.
30° opening angle allows easy access.
Easy to lift (with the weight of top board) with minimum force.
Long brackets provided for better support to the bed platform.
We sale this product in Rs./Pair.

Specification
Fitting Instructions

Specification

Specification

Size 3ft regular PLBF-R, 5ft extended arm PLBF-E

Finish Black

Set Pair

*If you have any specific question related to the product, please contact us.
Fit the Fix Brackets on bed frame as per given dimension. (Ref. Fig.1) without the gas spring fitted.Now fix the bed platform to the top brackets. (Ref. Fig.2).

Specification
Size	3ft regular PLBF-R, 5ft extended arm PLBF-E
Finish	Black
Set	Pair

View full product details »

Ebco Table Bracket TB Set of 2 pcs.

Rs. 598.00

SPECIFICATIONS:-

Ideal fitting for a fold away table.
Special release latch helps fold the table
Built for strength and durability.
Available in silver and black powder coated.
Weight (Pair) : 1.5 kg/300mm; 2kg/400mm; 2.6 kg/500mm

Item Code	Size "A"
TB30	300 mm
TB40	400 mm
TB50	500 mm
TB60	600 mm

FITTING INSTRUCTIONS:-

Screw the Side Bracket to the wall with wall plugs and screws. (Ref. Fig. 1). The wall must be solid wood, brick wood or concrete only. Do not use plywood, blockboard etc.
It can be folded and kept while not in use. Pull the slider as given in the diagram to fold the bracket. (Ref Fig. 2 & 2A)

View full product details »

Ebco Sliding Wardrobe Lock P-WLS1

Rs. 346.00

Ideal for Sliding Wardrobe Shutters.
Available in two sizes for 19mm & 25mm Shutters.
Do not drop the lock or apply extreme force or even dismantle the lock.
Avoid the use of adhesives, in order to prevent the lock from malfunction.

View full product details »

Ebco EURO Slip on hinge E-HS Set of 2pcs

Rs. 78.00

Ebco EURO Slip on hinge E-HS

Type - 1) Full overlay ( E-HS1)

2) Half overlay ( E-HS2)

3) Inset ( E-HS3)

Ideal for Flush doors, cabinet, drawers

Finish - Nickel - plated

View full product details »

Ebco Articulated K.B Station - Platfrom (With Mouse Tray) Soft Pad ASPSM

Rs. 1,650.00

Specification
Fittings Instructions
Shipping

SPECIFICATIONS
1. This new generation keyboard station has a built in slide and keyboard platform.
2. Platform is made out of high quality foil pressed on prelaminated MDF.
3. Stable durable design.
4. Simultaneous adjustment.
5. Can be tilted and rotated.
6. Soft palm rest and a stowaway mouse pad.
7. Functional design combined with elegant looks.
8. Easy to assemble and transport.
9. Spring assisted to help counter balance.
10. Low profile design for maximum leg room.
11. 360° swivel allows user to move keyboard freely from side to side.
Item Type Code Nos. Finish

Articulated Keyboard Station Platform With Mouse Tray ASPSM Black Texture

*If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.
FITTING INSTRUCTIONS
1. Fit the retainer plate under the table top leaving 15mm from the front. Fit the stopper bush at the rear end.(Ref. Fig.1) Use pan head wood screws provided.
2. Fit the keyboard platform with the station assembly (Ref. Fig.2)
3. Slide the platform assembly into the retainer Plate.(Ref. Fig. 3)
4. Screw the plastic front stopper onto the front end of the retainer plate.(Ref. Fig.4)
5. Mouse tray shall be fitted on left or right side which mounting holes are predrilled.(Ref. Fig.5)
6. Use to adjust angle, height as well as for storage.
As per store shipping policy. If you need any other finish please contact our sales team.

View full product details »

Ebco Aluminium Handle -c1

Rs. 256.00

Variety of designs to select from.
Ergonomically designed for good grip.
Available in different lenghts as per system - 32.
Various Finishes.

Specification
Shipping

Specification

Finish Anodized Silver

Pcs./set Each

*If you have any specific question related to the product, please contact us.
As per store shipping policy.

Specification
Finish	Anodized Silver
Pcs./set	Each

View full product details »

Ebco Skirting Clip for Q Plinth

Rs. 213.00

Easy to slide-in to the skirting and clip to the legs.
Finish: Black.

Specification
Shipping

Specification

Finish Black

Size 100mm

*If you have any specific question related to the product, please contact us.
As per store shipping policy.

Specification
Finish	Black
Size	100mm

View full product details »

Ebco Sleek Telescopic Drawer Slide (I)35

Rs. 192.00

Precision telescopic slides.
Full extension of drawer.
Load capacity: STDS (I) 35=35Kgs.
Direct fitting from front.
Removable drawer with Latch
System 32 installation.

Specification
Fitting Instructions

Specification Drawer Slide

Finish Zinc White / Zinc Black

Pcs./set Set of 2 pcs

Hardware Product Type Sleek Telescopic Drawer Slide

*If you have any specific question related to the product, please contact us.
To install sleek telescopic drawer slide 12.7 to 13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.

Specification	Drawer Slide
Finish	Zinc White / Zinc Black
Pcs./set	Set of 2 pcs
Hardware Product Type	Sleek Telescopic Drawer Slide

View full product details »

Quantity

Continue Shopping or Checkout

Ebco Push Open Fitting - Stroke 20/40mm PO

Rs. 119.00

Push Open Fitting – Stroke 20mm:-

With (screw-on) adapter plate for drawers & doors without handles, stroke 20mm.
Adjustable distance is 4mm.

Push Open Fitting – Stroke 40mm:-

With (screw-on) adapter plate for drawers & doors without handles, stroke 40mm.
Adjustable distance is 4mm.

View full product details »

Ebco Door Latch - SS 304 DL1 Set of 2

Rs. 72.00

Made out of SS 304.
Easy to Fit.
Easy to Use.

View full product details »

EBCO Sliding Windows lock 1925(With key) P-SWL-1K

Rs. 356.00

Specification
Fittings Instruction

Specification Glass Door Pull Handle

Finish BLACK/WHITE

Pcs./Set
Pair
1.Cut two Cavities in Shutter as shown in Fig.1.Screw on the Bumpers to the Shutter as shown in Fig.2. for approx. dimensions refer Fig.1. Insert the lower part of the Body in to cavity in Shutter and Click on the upper part of the Body as shown in Fig.3. Insert the Hook into the body through the side cavity in the shutter as shown in Fig. 4. Push the Slider downward & tighten the Grub screw with Allen key as shown in Fig. 5. Fit the Catch into the Frame as shown in Fig. 6. To remove the body from shutter, unscrew the grub screw & remove the Hook first & then insert a flat thin screw driver into the thin slot provided in the body & compress the spring.

Specification	Glass Door Pull Handle

Finish	BLACK/WHITE
Pcs./Set	Pair

View full product details »

Ebco CPU Stand - ECO CPUS E1 Set of 1

Rs. 484.00

CPU Stand - ECO CPUS E1 Set of

C.P.U. Stand for storage of C.P.U. Unit just under the table.

This saves a lot of space in the table.

Vibration pad are installed for the safety of your CPU unit.

View full product details »

Ebco Aluminium Handle -c

Rs. 204.00

Variety of designs to select from.
Ergonomically designed for good grip.
Available in different lenghts as per system - 32.
Various Finishes.

Specification
Shipping

Specification

Finish special finish

Pcs./set Each

*If you have any specific question related to the product, please contact us.
As per store shipping policy.

Specification
Finish	special finish
Pcs./set	Each

View full product details »

Ebco Recessed Handle - 90mm RH 90 Set of 20pcs

Rs. 470.00

Made out of Durable plastic.

System – 32 Compatible.

Handle remains Recessed.

View full product details »

Ebco Adjustable Glass Shelf Support AGSS1 Set of 2

Rs. 168.00

Elegantly designed to suit Modern & Traditional decor.
Adjustable for glass shelves of thickness 6mm to 12mm.
Screw locking with plastic pad for protection.
Finish: Satin Nickel Plating and Powder Coating.

Fitting Instructions:

Only suitable for solid walls.
Span between supports should not exceed 400 mm. (Ref. Fig.1)
Shelf should not overhang by more than 100 mm. (Ref. Fig.1)
Uniform distributed load not to exceed 15 Kgs. (Ref. Fig.1)
Loosen the screw below the shelf support. (Ref. Fig.2)
Fix it on the wall with screws and wall plugs provided. (Ref. Fig.3)
Place the glass and tighten the screws properly. (Ref. Fig.4)

View full product details »

Ebco Pedestal Lock MPL2-22

Rs. 214.00

Ideal for front mount, multi-drawer pedestal units.
Key removable in locked and unlocked position.
180° rotary lifting pin movement.
Zinc alloy die-cast chrome finish.

View full product details »

Ebco Square Lock 32mm SQL1-32

Rs. 192.00

For single drawers with requirement of square body.

Do not drop the lock or apply extreme force or even dismantle the lock.

Avoid the use of adhesives, in order to prevent the lock from malfunction.

View full product details »

Ebco K.B Tray - Curve Without Mouse Tray KBTC 35 Each

Rs. 637.00

Specification
Fittings Instructions
Shipping

Item Code Nos. Length in mm Extension in mm Dim A in mm Finish

Without Mouse Tray

KBTC 35

350 240 255 Black & White
- Simple and cost effective design.
- Height adjustment on mounting brackets.
- Direct front installation.
- Comes with a formed pencil tray.
- Smooth quiet movement with telescopic slides.
- Unique arched hand rest to prevent fatigue while working.
- Locks at extended position.
- Max. Load 12kgs.
*If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.
1. Minimum horizontal gap required is 550mm.
2. Drill as per drilling diagram as in Fig. 1.
3. Assemble height adjustment brackets on to the slides using M4 screws provided as in Fig. 2.
4. Height adjustment bracket should be adjusted for desired height.
5. Screw the mounting bracket 85mm distance from the edge of the table and to other end 255mm & 355mm respectively for 350mm & 400mm slides (Refer Fig. 3)
As per store shipping policy. If you need any other finish please contact our sales team. We can provide almost all kind of finishes. Customized orders may take up to 25 days for Dispatch and are Non Returnable.

View full product details »

EBCO VERTEBRAE (OVAL) VO2

Rs. 651.00

SPECIFICATIONS:-

Code Nos.	Finish
VO 2	Grey

Ideal for concealing electrical and data cables separately at a work station in an organized way.
Enhances the look of furniture.
Manufactured out of plastic and is flexible.

View full product details »

Ebco WARDROBE PULLOUT HANGER - TROUSER / SAREE - SINGLE

Rs. 9,600.00

Wardrobe Pull Out Hanger - Single is an absolute novelty due to its versatility and its ability to take advantage of usually empty wardrobe space.
It is mounted under the shelves.
Can take load up to 10 saree / trousers.
Ring seat for possible housing of small clothing accessories (belts, ties, scarves).

Specification

Specification

Item Code No. Size in mm Finish

Pull out Trouser Hanger WPH-TSS-45 Min. cabinet width 450 Grey

*If you have any specific question related to the product, please contact us.
https://www.youtube.com/watch?time_continue=6&v=WNo65_vU1ik