Designed for cabinets having blind corner panel. Max opening 105º Max shutter size 850mm X 550mm (34" X 22") for 2 hinges. Shutter thickness 16mm to 19mm. 3 way adjustment with system 32 compatibility. Finish - Nickel Plated
Ebco EURO - Slow Motion Hinge 4 hole Mounting Plate
Rs. 234.00
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Euro Slo Motion Hinge - Full Overlay with 4 Hole Mounting Plate
E-HSM1-M1
36
Nickel Plated
Euro Slo Motion Hinge - Half Overlay with 4 Hole Mounting Plate
E-HSM2-M1
36
Nickel Plated
Euro Slo Motion Hinge - Inset with 4 Hole Mounting Plate
E-HSM3-M1
58
Nickel Plated
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Ebco EURO - Slow Motion Hinge with 2 hole Mounting Plate E-HSM Set of 2pcs
Rs. 194.00
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Euro Slo Motion Hinge - Full Overlay with 2 Hole Mounting Plate
E-HSM1
36
Nickel Plated
Euro Slo Motion Hinge - Half Overlay with 2 Hole Mounting Plate
E-HSM2
36
Nickel Plated
Euro Slo Motion Hinge - Inset with 2 Hole Mounting Plate
E-HSM3
58
Nickel Plated
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
EBCO Push Open Hinges (With magnetic push open fittings) HPO-POM
Rs. 204.00
DESCRIPTION
This new hinge with special reverse spring enables automatic opening of door by exerting small amount of pressure to the door.
Available in Full Overlay, Half Overlay and Inset. For shutter thickness of 16mm to 19mm
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Hinge - Full Overlay
HPO1-POM
35
NP
Hinge - Half Overlay
HPO2-POM
35
NP
Hinge - Inset
HPO3-POM
35
NP
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Max. Shutter size: 34" x 22"(850mm x 550mm) for 2 hinges.
Shutter Thickness: 18mm to 30mm.
Shutter cavity: Ø40mm, 14 deep, 4mm from edge.
Finish: Nickel Plated
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Hinge - Full Overlay
HTD1
40
NP
Hinge - Half Overlay
HTD2
40
NP
Hinge- Inset
HTD3
40
NP
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
