Ebco Thick Door Hinge (For shutter thickness 18-30 mm)
DESCRIPTION
Available in Full Overlay, Half Overlay & Inset.
Max. Opening: 100°.
Max. Shutter size: 34" x 22"(850mm x 550mm) for 2 hinges.
Shutter Thickness: 18mm to 30mm.
Shutter cavity: Ø40mm, 14 deep, 4mm from edge.
Finish: Nickel Plated
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Hinge - Full Overlay
HTD1
40
NP
Hinge - Half Overlay
HTD2
40
NP
Hinge- Inset
HTD3
40
NP
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
