Ebco Computer Keyboard Tray KBT

Rs. 1,092.00

• Specification
• Fittings Instructions
• Shipping
  
  
  
  

  SPECIFICATIONS

  1. Allows your keyboard to be neatly stored underneath your desk and pulled out when required.
  2. This product comes with or without a left or right side retractable mouse pad tray.
  3. Its height can be adjusted by using the height adjustable mounting brackets.
  4. Moves quietly and smoothly with keyboard slides.
  5. It has a unique angled hand rest to prevent fatigue while working.
  6. Available with 200mm extension.
  7. Comes with a special compartment for a pencil.
  8. The tray can be detached from the slides (using latches).
  9. Special pressure locks at extended position.
  10. Maximum Load: 12kgs.
  11. Available in Black.

   

  Item	Type	Code Nos.	Finish
  Computer Keyboard Tray	With Mouse Tray	KBT35M	Black Texture
  Computer Keyboard Tray	Without Mouse Tray	KBT35	Black Texture

  *If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.

• FITTING INSTRUCTIONS

  1.  Assemble height adjustment brackets on to slides using M4 screw provided as in Fig. 1

     2. Drill as per drilling diagram Fig. 2

     3. Height adjustment bracket should be adjusted for desired height.

     4. Screw the keyboard tray onto the table. Table should have minimum horizontal gap of 600mm.

     5. Slide the keyboard tray out till it automatically latches.

     6. To remove tray lift ltaches provided on each sides and pull as per Fig. 3.

  

• As per store shipping policy. If you need any other finish please contact our sales team. 

View full product details »

Ebco Flat Screen Holder Double Arm FSHDA

Rs. 2,090.00

• Specification
• Overview
• Application
• Shipping

• SPECIFICATIONS

  Code No.	Finish
  FSHDA	AT, Black,

   

  

  *If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.

• Overview
  
  1. Table top grommet mounting with double arm.
  2. Easy to Fit.
  3. Height adjustment of 100mm.
  4. Compatible for VESA 75 x 75 & 100 x 100 with an extra plate.
  5. Die cast for good aesthetics.
  6. Can be rotated towards left & right as well as tilted up & down with a single knob.
   
• FITTING INSTRUCTIONS

  1. Drill Ø 12.5mm hole through out on Table Top on the desired position.
  2. Fix the vertical pole as shown in fig. 1.
  3. Clip the height adjustment clip on to the one of the holes on the vertical pole and slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip as shown in Fig. 2.
  4. Assemble the other parts as shown in Fig. 3.
  5. For VESA 100mm model, screw the 100mm plate to the hanging bracket with M4 screws as shown in Fig. 4.
  6. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig. 5.
  7. Insert the monitor cables into the arm clip and wire holder, then clip them to the diagonal arm and vertical pole respectively, as shown in Fig. 6.

  
• As per store shipping policy. If you need any other finish please contact our sales team. 

View full product details »

Ebco Flat Screen Holder Single Arm- Edge Mount FSHSA-EM

Sold Out

• Specification
• Overview
• Application
• Shipping

• SPECIFICATIONS

  Model	Code	Finish
  Flat Screen Holder Single Arm - Edge Mount	FSHSA - EM	Black / Silver / White Texture / Anthracite

  
  

   

  
  

  *If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.

• Overview
  
  1. Table top edge mounting with single arm.
  2. No drilling of holes required.
  3. Height adjustment of 100mm.
  4. Compatible for VESA 75 x 75 & VESA 100 x 100 with an extra plate. 
  5. Die cast for good aesthetics.
  6. Can be rotated towards left & right as well as tilted up & down with a single knob.
  7. Load capacity: < 7 kilograms

   

• FITTING INSTRUCTIONS
  1. 1. Clamp the vertical pole onto the edge of the table as shown in Fig.1.
     2. Clip the height adjustment clip onto one of the holes on the vertical pole, & slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip, as shown in Fig.2.
     3. Assemble the other parts as shown in Fig.3.
     4. For VESA 100mm model screw the 100mm plate to hanging bracket with M4 screws as shown in Fig.4.
     5. Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig.5.
     6. Insert  the monitor cables into the arm clip & wire holder, then clip them to the diagonal arm & vertical pole respectively as shown in Fig.6.

      

        

• As per store shipping policy. If you need any other finish please contact our sales team. 

View full product details »

Ebco Flat Screen Holder Single Arm- FSHSA

Rs. 1,142.00

Ebco Flat Screen Holder Single Arm

• Specification
• Overview
• Application
• Shipping

• SPECIFICATIONS

  Code No.	Finish
  FSHSA	Powder coated Black,Anthracite

   

  
  

  *If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.

• Overview
  
  1. Table top grommet mounting with single arm.
  2. Easy to fit.
  3. Height adjustment of 100mm.
  4. Compatible for VESA 75 x 75 & VESA 100 x 100 with an extra plate.
  5. Die cast for good aesthetics.
  6. Can be rotated towards left & right as well as tilted up & down with a single knob.
   

        

• As per store shipping policy. If you need any other finish please contact our sales team. 

View full product details »

Ebco Tablet Holder TH1

Rs. 494.00

• Specification
• Overview
• Shipping

• SPECIFICATIONS

  Code no.	Size in mm	Finish
  TH 1BL	180 x 26 x 32	Black
  TH 1WH	180 x26 x 32	White

   

  

  *If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.

• Overview
  
  1. For Apple iPad, Kindle Fire, Galaxy Tab & other 7” – 10” tablet PC’s
  2. Foldable, compact & easy to carry around
  3. Flexibility to position your device in multiple angles in landscape or portrait view
  4. Size: 18cm x 2.6cm x 3.2cm
• As per store shipping policy. If you need any other finish please contact our sales team. 

View full product details »

EBCO VERTEBRAE (OVAL) VO2

Rs. 846.00

View full product details »