Ebco Wardrobe Rail Fittings WRF R1/2A 3

Rs. 284.00

These oval wardrobe rail supports are die cast for strength and long life
Easy to fit and compatible with a special oval rail.
Wardrobe rails are available in S.S 304 polished and Aluminium Anodized.
Coat hooks are also available.
System 32 compatible.
Rail center supports are elegantly designed, manufactured out of Zinc alloy for strength and increasing the load bearing capacity of wardrobe rails.

Anodised Silver

Pcs./set 3.66m

*If you have any specific question related to the product, please contact us.
Drill 2 holes on each internal side of wardrobe.First hole should be 24mm from the top internal face of cabinet and center distance to be 32mm apart. (Refer fig. 1).Holes should be at equal height.

Related Items

Rs. 94.00

Specification

Specification

Finish Nylon (WH/BR)

Pcs./set Set of 4 Pcs.

*If you have any specific question related to the product, please contact us.
Use Ø35mm cutter to make cavities on the inside of shutter. (Refer Fig.1).Cavity should be 10mm deep.Fit top housing and bottom housing in top and bottom cavities respectively.Rail is fitted in a slot at top and bottom of cabinet. Groove should be 8mm wide and 6mm deep. (Refer Fig.2).Wheel of bottom housing should sit in bottom rail.Spring loaded guide in top housing is pulled down so as to engage in top rail there by retaining the shutter. (Refer Fig.3).

Specification
Finish	Nylon (WH/BR)
Pcs./set	Set of 4 Pcs.

Rs. 197.00

Specification

Specification

Finish Black

Pcs./set Set

*If you have any specific question related to the product, please contact us.
One set is for one sliding shutters.Set of two sliding fittings with four wheels, each are fitted on top rack. (Refer fig.1).Set of two sliding fittings with one wheel, each are fitted on bottom track. (Refer fig.2).Cavities for sliding fittings are made at the four extreme ends of shutter. (Refer fig.3).Center distance between two rails should be 40 mm min. (Ref. Fig.4) IMPORTANT: TO BE ORDERED WITH THE ALUMINIUM RAILS. CODE NO. SFFA1.