1. Cut a cavity of 18.5 x 148 mm in shutter & 5.5 x 46mm in Frame as shown in Fig .1 2. Insert the lower part of the body into cavity in shutter & Click on the upper part of the body as shown in Fig 2. 3. Insert the hook into the body as shown in Fig 3. 4. Push the slider downwards and tighten the grub screw with Allen key as shown in Fig 4. 5. Insert the catch into the cavity in frame & screw the catch as shown in fig.4 6. To dismantle the body from the shutter unscrew the grub screw & remove the hook & then pull the body downward with some force and tilt and remove.
Body is fitted onto the sliding window shutter into a cavity made of 19 mm x 80 mm. (Ref. Fig.1)Catch is fitted on the frame. (Ref. Fig.1)..An opening of 13mm x 25mm is required in the width of the section for the catch to engage with the hook.(Ref. Fig.1)..Catch is fitted on the inside of the frame such that it engages with the hook when window is shut.(Ref. Fig.2)
1.Cut two Cavities in Shutter as shown in Fig.1.Screw on the Bumpers to the Shutter as shown in Fig.2.for approx. dimensions refer Fig.1. Insert the lower part of the Body in to cavity in Shutter and Click on the upper part of the Body as shown in Fig.3. Insert the Hook into the body through the side cavity in the shutter as shown in Fig. 4. Push the Slider downward & tighten the Grub screw with Allen key as shown in Fig. 5. Fit the Catch into the Frame as shown in Fig. 6. To remove the body from shutter, unscrew the grub screw & remove the Hook first & then insert a flat thin screw driver into the thin slot provided in the body & compress the spring.
1.Cut two Cavities in Shutter as shown in Fig.1.Screw on the Bumpers to the Shutter as shown in Fig.2. for approx. dimensions refer Fig.1. Insert the lower part of the Body in to cavity in Shutter and Click on the upper part of the Body as shown in Fig.3. Insert the Hook into the body through the side cavity in the shutter as shown in Fig. 4. Push the Slider downward & tighten the Grub screw with Allen key as shown in Fig. 5. Fit the Catch into the Frame as shown in Fig. 6. To remove the body from shutter, unscrew the grub screw & remove the Hook first & then insert a flat thin screw driver into the thin slot provided in the body & compress the spring.
Ebco Windows Fittings Friction Stay Floating FRS16FL
Rs. 1,797.00
Made of AISI 304 stainless steel and brass.
Built-in quick release levers allow window to be fully opened for easy cleaning or emergency escape. Restrictor mechanism automatically relocated and resets as the window is closed.
To be used in side hung only.
Designed as a pair of left and right (top and bottom)
Gap between shutter and frame should be 15mm for size 205mm, 255mm and 305mm, and 355mm and 18mm gap for 405mm, 510mm, 610mm, and 710mm. Width of stay is 19mm for size 205mm, 255mm, 305mm and 355mm and 22mm for size 405mm, 510mm 610mm, and 710mm.
Gap between shutter and frame should be 15mm for size 205mm, 255mm and 305mm, and 355mm and 18mm gap for 405mm, 510mm, 610mm, and 710mm. Width of stay is 19mm for size 205mm, 255mm, 305mm and 355mm and 22mm for size 405mm, 510mm 610mm, and 710mm.
