EBCO Door Closer - DC 101

Rs. 1,775.00

Special Features:

Hold open facility
Hold open angle 90 degree to 160 degree.
Door opening angle of 180 degree Max.
Latching and Closing speed adjust valve.
Right hand and left hand opening door.
Door width 600 – 800mm.
Door weight 60 kgs.
5, 00,000 cycles tested.

Specification
Shipping
Fitting Instructions

Specifications:

Item Code	Body Size in mm			Hold Open Facility	Fire Rated	Latching and Closing Speed Adjust Valve	Technical Parameter
	L	W	H				Door Width	Weight
DC 101	148	37	57	Yes	Yes	Available	600-800mm	60kgs

As per store shipping policy.
The steps of vertical installation
1. Cut down the template according to your demand, Stick the template on the door and frame
2. According to the position of the installation template, drill holes to install the screws.
3. Take off Main Arm and Adjective Arm. Put the arm and the door closer main body in cross shape. Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
4. According to the drilled holes, install the door closer body on frame or door.
5. Pre load the arm to an angle and then install it together with the Adjective Arm which is vertical to the door. Adjust the length of the Arm to install the Arm. At last, fasten the screws on the arm.
6. Put dust proof cap on the other end of the gear shaft
The standard installation

The template of the right hand pull side door vertical installation.
(The template of the left hand pull side door vertical installation is opposite of the template of the right hand pull side door vertical installation).

The reverse installation

The template of the left hand push side door vertical installation.
(The template of the right hand push side door vertical installation is opposite of the template of the left hand push side door vertical installation).

The steps of parallel installation
1. According to the mark, fold the parallel installation template to 90⁰. Stick it on the door and frame
2. According to the position of the installation template, drill screw holes.
3. According to the drilled holes, install the door closer main body and PA board on the door and door frame. Then fasten.
4. Take off the bracket of the Adjective Arm, Preload the arm to 45⁰, Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
5. Adjust the length of the Adjective Arm to install the Arm, make it parallel with door closer main body. Put the clamp cover on the gear of the parallel board. Fasten the assembled screw, then fasten the nut of the link.
6. Put the dust-proof cap on the other end of the gear shaft.
Adjust the speed of the door closer by:-
1. The Closing speed regulation valve and latching speed regulation valve.
2. Counter-clockwise turning can make the speed faster. On the contrary, clockwise turning will make the speed slower.
The parallel installation

The template of the right hand push side door parallel installation
(The template of the left hand push side door parallel installation is opposite of the template of the right and push side door parallel installation)

Notices.
1. Please don't rotate the direction of the square tenon of the gear before install the door closer.
2. Please don't hit the square tenon of the gear hard when you install the arm.
3. Door closer can auto-close the door by themselves extra efforts to close the door are not permitted.
4. Fasten all the screws after half a moth with use.
5. Pay attention to the speed regulation in the summer and winter seasons.
6. Please don't screw the regulating valve off main body, when you adjust the speed.

Ebco Worksmart Computer Monitor Arm – Double Screen

Reclaim your desk space and work smarter with the Ebco Worksmart Computer Monitor Arm. Engineered for dual-monitor setups, this premium arm delivers effortless ergonomic adjustments so you can work comfortably for longer.

Key Features

Dual Monitor Support – Holds two monitors simultaneously with a stable, balanced design.
Wide Monitor Compatibility – Fits standard monitors from 15" to 27".
High Load Capacity – Supports up to 8 kg per arm for reliable, long-term use.
Full Range of Motion – Rotate left/right and tilt up/down with a single knob for quick, precise positioning.
VESA Compatible – Supports VESA mounting patterns of 75×75 mm and 100×100 mm.
Grommet Mounting – Mounts securely to your tabletop via grommet for a clean, cable-friendly setup.
Ergonomic Design – Simultaneous multi-axis adjustments reduce strain and improve posture.
Premium Aesthetics – Die-cast construction with a sleek Anthracite finish that complements any workspace.
Durable & Stable – Built to last with a robust, wobble-free base.

Models & Specifications

Model	Code	Finish
Computer Monitor Arm – Double Screen	CMA-DA	Anthracite
Computer Monitor Arm – Double Extended Arm	CMA-DEA-AT	Anthracite

View full product details »

+ Quick Shop

EBCO Thick Door Hinge 15-35mm With 3D Mounting Plate Rs. 308.00

Front Multi Drawer Lock with Metal Key E-FMDL48 M , E-FMDL58 M

+ Quick Shop

Ebco Secutek Front Multi Drawer Lock from Rs. 318.00

Ebco Sleek Telescopic Drawer Slide (I) 35 Soft Close

+ Quick Shop

Ebco Sleek Telescopic Drawer Slide - 35- Soft Close from Rs. 697.00

Ebco Sleek Telescopic Drawer Slide - 35- Soft Close

Rs. 697.00

Precision telescopic slide
Easy for installation.
Load capacity: 35kgs.
Direct fitting from front.
Removable drawer with Latch.
System 32 installation.

Specification
Fitting Instructions

Specification Drawer Slide

Finish ZW/ZB

Pcs./set Set of 2 pcs

Hardware Product Type Sleek Telescopic Drawer Slide

*If you have any specific question related to the product, please contact us.
To install sleek telescopic drawer slide 12.7 to13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.

Specification	Drawer Slide
Finish	ZW/ZB
Pcs./set	Set of 2 pcs
Hardware Product Type	Sleek Telescopic Drawer Slide

View full product details »

Item	Code	Finish
Thick Door Hinge 15-35mm with 3D mounting plate	HTD1-15-35-3D	NP
Thick Door Hinge 15-35mm with 3D mounting plate	HTD2-15-35-3D	NP

Item	Item Code	Size	Finish
Front Multi Drawer Lock - 480mm	FMDL 48	480 mm	Nickel Plated
Front Multi Drawer Lock - 580mm	FMDL 58	580 mm	Nickel Plated

EBCO Door Closer - DC 101

Related Items

Sign Up for our Newsletter

INFO

Policy

EBCO Door Closer - DC 101

Related Items

Ebco Worksmart Computer Monitor Arm Double Screen

Ebco Worksmart Computer Monitor Arm – Double Screen

Key Features

Models & Specifications

EBCO Thick Door Hinge 15-35mm With 3D Mounting Plate

EBCO Thick Door Hinge 15-35mm With 3D Mounting Plate

Ebco Secutek Front Multi Drawer Lock

Ebco Secutek Front Multi Drawer Lock FMDL48 , FMDL58

Ebco Sleek Telescopic Drawer Slide - 35- Soft Close

Sign Up for our Newsletter

INFO

Policy

Social