Ebco Bottom Mounting Drawer Slides - BMDS

Ebco Full Panel (54mm, 86mm & 125mm) - FPDS - Set of 4 Pcs

Rs. 268.00

• Specification
• Overview
• Application
• Shipping

• Height (mm)/Code Nos.			Length mm	Extension mm	Finish
  54	86	125
  					Ivory
  FPDS 54-35	FPDS 86-35	FPDS 125-35	350	275
  FPDS 54-40	FPDS 86-40	FPDS 125-40	400	325
  FPDS 54-45	FPDS 86-45	FPDS 125-45	450	375
  FPDS 54-50	FPDS 86-50	FPDS 125-50	500	425

  *If you have any specific question related to the product, please contact us.

• Special Features 
  1. Simplifies construction of drawer as it eliminates the sides of drawer.
  2. Saves wood, labor, drawer space.
  3. Tilt and remove capability with guiding.
  4. 'Auto closing' of drawer.
  5. Front fascia height adjustment.
  6. Ribbed for strength.
  7. Precision rollers for smooth running.
  8. Load capability - 25 kgs.
  9. "System 32" compatible.
  10. Stopper prevents drawer from falling.
• Fitting Instructions
  1. Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
  2. Clearance of 25.4mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
  3. Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
  4. Screws should be recessed to avoid fouling.
  5. Fixed slides should be fitted parallel and at equal height to each other.
  6. Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.
• As per store shipping policy.

View full product details »

Ebco Full Panel Quick Fit (Ht. 54,86,125mm) -FPQ - Set of 5 Pcs

Rs. 452.00

• Specification
• Overview
• Application
• Shipping

• Code No.	Height(mm)	Depth(mm)	Width(mm)	Extention	Max Load kgs	Finish
  FPQ 54-40-40	54	400	400	325	25	Ivory.
  FPQ 54-40-45	54	400	450
  FPQ 54-45-40	54	450	400	375
  FPQ 54-45-45	54	450	450
  FPQ 86-40-40	86	400	400	325
  FPQ 86-40-45	86	400	450
  FPQ 86-45-40	86	450	400	375
  FPQ 86-45-45	86	450	450
  FPQ 125-40-40	125	400	400	325
  FPQ 125-40-45	125	400	450
  FPQ 125-45-40	125	450	400	375
  FPQ 125-45-45	125	450	450

  A (mm)	B (mm)	C (mm)	D (mm)
  54	71	52	32
  86	103	84	64
  125	142	123	96

  *If you have any specific question related to the product, please contact us.

• Special Features 
  1. A unique new way to assemble a drawer by clipping on a matching back panel.
  2. This not only improves the look of the drawer but also saves valuable time during assembly and brings down cost.
  3. Tilt and remove capability with guiding.
  4. Auto closing of drawer
  5. Front fascia adjustment.
  6. Precision rollers for smooth running.
  7. 'System 32' compatible.
• Fitting Instructions
  1. Side gap of 15.5mm is required and acts as side panel of drawer (Fig.1).
  2. Eccentric Cam for front facia height adjustment provided in 86mm and 125mm height Full Panels with 6mm bottom track (Ref. Fig 2)
  3. 25.4mm clearance from top edge of drawer required to tilt and remove drawer (Refer Fig. 2).
  4. Fixed slide should be set by 2mm for 'Auto-Closing' (Fig. 2).
  5. Screws should be recessed to avoid fouling.
  6. Fixed slides should be fitted parallel and at equal heights to each other.
  7. Insert the Rear panel onto the Side panels through the key slot provided in the side panels (Ref. Fig.3).
  8. Place the bottom flap through the track provided in the Side panels and fix the front facia with the Bracket and insert the unit onto fixed slides which are fitted internal sides of cabinet (Ref. Fig.4).
• As per store shipping policy.

Caution
For efficiency and Durability

1. Strictly maintain side gap of 15.5mm per side
2. Fix slides are parallel and at equal height
3. Do not apply paint or polish

View full product details »

Ebco Full Panel Quick Fit Drawer (Ht. 125mm) - FPQ - Set of 5Pcs

Rs. 534.00

• Specification
• Overview
• Application
• Shipping
• Volumetric Weight

• Code Nos.	Height	Depth	Width	Extension	Max Load kgs	Finish
  FPQ 125-40-40 F	125	400	400	325	25	Powder Coated Ivory.
  * FPQ 125-40-40 FG1	125	400	400
  FPQ 125-40-45 F	125	400	450
  * FPQ 125-40-45 FG2	125	400	450
  FPQ 125-45-40 F	125	450	400	375
  * FPQ 125-45-40 FG3	125	450	400
  FPQ 125-45-45 F	125	450	450
  * FPQ 125-45-45 FG4	125	450	450
  * with Gallery fitting set

   

  *If you have any specific question related to the product, please contact us.

• Special Features 
  1. Special raised rear panel is ideal for filing cabinets.
  2. A unique new way to assemble a drawer by clipping on a matching back panel.
  3. This not only improves the look of the drawer but also saves valuable time during assembly and brings down cost.
  4. Tilt and remove capability with guiding.
  5. Auto closing of drawer.
  6. Precision rollers for smooth running.
  7. 'System 32' Compatible.
  8. Available with eccentric cam for fascia height adjustment in 86mm & 125mm height Full Panels.
• Fitting Instructions
  1. Side gap of 15.5mm is required and acts as side panel of drawer (Fig. 1).
  2. Fixed slide should be set by 2mm for 'Auto-closing' (Fig. 2).
  3. Screws should be recessed to avoid fouling.
  4. Fixed slides should be fitted parallel and at equal heights to each other.
  5. Insert the raised rear panel on to the side panels through the key slot provided in the side panels (Ref. Fig.3).
  6. Slide the 6mm bottom panel through the tracks provided in the side panels. (Ref. Fig. 4).
  7. Connect the cross rods by using T-connectors as shown in diagram (Ref. Fig. 5).
  8. Screw the font facia with side panels and insert the dowel in to the Ø8mm hole made in front facia, screw the side rods in to the dowels (Ref. Fig. 6). Push the other end of the rod in to the plastic sleeve fitted on the raised rear panel (Ref. Fig. 7).
  9. Eccentric cam for front fascia height adjustment provided in 86mm & 125mm height Full Panels. (Ref. Fig . 2)
• As per store shipping policy.
• For VOLUMETRIC WEIGHT.

View full product details »

Ebco Full Panel with 6mm Bottom Track - FPDS - Set of 4 Pcs

Rs. 282.00

• Specification
• Overview
• Application
• Shipping
• Volumetric Weight

• FULL PANEL WITH 6MM BOTTOM TRACK
  Code Numbers / Height				Length mm	Extension mm	Finish
  54	86	125	150
  FPDS 54 30-6	FPDS 86 30-6	FPDS 125 30-6	FPDS 150 30-6	300	225	Ivory
  FPDS 54 35-6	FPDS 86 35-6	FPDS 125 35-6	FPDS 150 35-6	350	275
  FPDS 54 37-6	FPDS 86 37-6	FPDS 125 37-6	FPDS 150 37-6	375	300
  FPDS 54 40-6	FPDS 86 40-6	FPDS 125 40-6	FPDS 150 40-6	400	325
  FPDS 54 45-6	FPDS 86 45-6	FPDS 125 45-6	FPDS 150 45-6	450	375
  FPDS 54 50-6	FPDS 86 50-6	FPDS 125 50-6	FPDS 150 50-6	500	425
  FPDS 54 52-6	FPDS 86 52-6	FPDS 125 52-6	FPDS 150 52-6	525	450
  FPDS 54 55-6	FPDS 86 55-6	FPDS 125 55-6	FPDS 150 55-6	550	475

  
  
  

  A  (mm)	B  (mm)	C  (mm)	D  (mm)
  54	71	52	32
  86	103	84	64
  125	142	123	96
  150	167	148	96

  *If you have any specific question related to the product, please contact us.

• Special Features 
  1. Simplifies construction of drawer as it eliminates the sides of drawer.
  2. Saves wood, labour, drawer space, time and cost, which enhances bulk production.
  3. Tilt and remove capability with guiding
  4. Auto closing of drawer.
  5. Front fascia height adjustment cams provided in 86mm & 125mm height Full Panels with 6mm bottom track.
  6. Ribbed for strength.
  7. Precision rollers for smooth running.
  8. Load capability - 25 kgs.
  9. "System 32" compatible.
  10. Stopper prevents drawer from falling.
  11. Also available with 6 mm bottom track easy to fit and helps in faster assembly, as it does not require screwing the bottom, using 6 mm board in place of 9 mm or 12 mm.
• Fitting Instructions
  1. Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
  2. Clearance of 25mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
  3. Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
  4. Screws should be recessed to avoid fouling.
  5. Fixed slides should be fitted parallel and at equal height to each other.
  6. Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.
  
  Caution
  
  1. Strictly maintain side gap of 15.5 mm per side.
  2. Fix slides parallel and at equal height.
  3. Do not apply paint or polish.
• As per store shipping policy.
• For VOLUMETRIC WEIGHT.

View full product details »