Get 20% off by using code: flat20 **

EBCO Push Open Hinges (With magnetic push open fittings) HPO-POM

Continue Shopping or Checkout


  • This new hinge with special reverse spring enables automatic opening of door by exerting small amount of pressure to the door.
  • Available in Full Overlay, Half Overlay and Inset. For shutter thickness of 16mm to 19mm

Item Code No A'mm Finish 
 Hinge - Full Overlay  HPO1-POM 35 NP
 Hinge - Half Overlay  HPO2-POM 35 NP
Hinge - Inset  HPO3-POM 35 NP


  • Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
  • Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  • Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
  • Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  • By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.


    Related Items