Get 20% off by using code: flat20 **

EBCO Thick Door Hinge HTD

Continue Shopping or Checkout

Thick Door Hinge  (For shutter thickness 18-30 mm)
  • Available in Full Overlay, Half Overlay & Inset.
  • Max. Opening: 100°.
  • Max. Shutter size: 34" x 22"(850mm x 550mm) for 2 hinges.
  • Shutter Thickness: 18mm to 30mm.
  • Shutter cavity: Ø40mm, 14 deep, 4mm from edge.
  • Finish: Nickel Plated

Item Code No A'mm Finish 
 Hinge - Full Overlay  HTD1 40 NP
  Hinge - Half Overlay  HTD2 40 NP
  Hinge-  Inset HTD3 40 NP


  • Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
  • Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
  • Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
  • Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
  • By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.


    Related Items