Ebco Full Panel Quick Fit (Ht. 54,86,125mm) -FPQ - Set of 5 Pcs

Ebco Bottom Mounting Drawer Slides - BMDS

Rs. 178.00

Special Features

1. New smooth silent roller system.
2. Right side pair has lateral guiding.
3. Left side pair has side gap adjustment.
4. Tilt and remove drawer.
5. Stopper to prevent drawer from falling.
6. New "Auto-Closing" feature of drawer.
7. "System-32" Compatible.
8. Ribs provided for strength.
9. Load capability - 20 Kgs.

Fitting Instructions

1. Side gap of 12.7 mm (1/2") per side required (Refer fig. 1).
2. 25.4 mm (1") clearance from top edge of drawer required to tilt and remove drawer (Refer fig. 2).
3. Fixed and moving slide should be equally offset by 2 mm for Auto-Closing (Refer fig. 2).
4. Recess screw heads to avoid interference.
5. A set of slides must be fitted parallel and at same heights to each other.

Finish

1. Ivory
2. Brown
3. Black

View full product details »

Ebco Full Panel (54mm, 86mm & 125mm) - FPDS - Set of 4 Pcs

Rs. 344.00

• Specification
• Overview
• Application
• Shipping

• Height (mm)/Code Nos.			Length mm	Extension mm	Finish
  54	86	125
  					Ivory
  FPDS 54-35	FPDS 86-35	FPDS 125-35	350	275
  FPDS 54-40	FPDS 86-40	FPDS 125-40	400	325
  FPDS 54-45	FPDS 86-45	FPDS 125-45	450	375
  FPDS 54-50	FPDS 86-50	FPDS 125-50	500	425
  FPDS 54-30	FPDS 86-30	FPDS 150-35	350	275

  *If you have any specific question related to the product, please contact us.

• Special Features 
  1. Simplifies construction of drawer as it eliminates the sides of drawer.
  2. Saves wood, labor, drawer space.
  3. Tilt and remove capability with guiding.
  4. 'Auto closing' of drawer.
  5. Front fascia height adjustment.
  6. Ribbed for strength.
  7. Precision rollers for smooth running.
  8. Load capability - 25 kgs.
  9. "System 32" compatible.
  10. Stopper prevents drawer from falling.
• Fitting Instructions
  1. Side gap of 15.5 mm per side is required and acts as side panel of drawer. (Refer fig 1).
  2. Clearance of 25.4mm from top edge of drawer required to tilt and remove drawer. (Refer fig 2).
  3. Fixed slide should be set by 2mm for auto-closing. (Refer fig 2).
  4. Screws should be recessed to avoid fouling.
  5. Fixed slides should be fitted parallel and at equal height to each other.
  6. Front fascia is to be fitted into front brackets which have 2-way adjustment for alignment.
• As per store shipping policy.

View full product details »

Ebco Sleek Telescopic Drawer Slide (I) 35 Soft Close

Rs. 680.00

1. Precision telescopic slides.
2. Soft closing function built in slide
3. Easy for installation.
4. Load capacity: 35kgs.
5. Direct fitting from front.
6. Removable drawer with Latch.
7. System 32 installation.

• Specification
• Fitting Instructions

• Specification	Drawer Slide
  Finish	Zinc White
  Pcs./set	Set of 2 pcs
  Hardware Product Type	Sleek Telescopic Drawer Slide

  *If you have any specific question related to the product, please contact us.

• To install sleek telescopic drawer slide soft close 12.7 to13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.

View full product details »

Ebco Sleek Telescopic Drawer Slide (I) 45

Rs. 320.00

1. Precision telescopic slides.
2. Full extension of drawer.
3. Load capacity: STDS (I) 45=45Kgs.
4. Direct fitting from front.
5. Removable drawer with Latch
6. System 32 installation.

• Specification
• Fitting Instructions

• Specification	Drawer Slide
  Finish	Zinc White / Zinc Black
  Pcs./set	Set of 2 pcs
  Hardware Product Type	Sleek Telescopic Drawer Slide

  *If you have any specific question related to the product, please contact us.

• To install sleek telescopic drawer slide 12.7 to 13.0mm gap per side is required between cabinet and drawer. (Refer Fig. 1)Depress latch and remove the inner slide. (Refer Fig. 2)Fit outer (fixed) slide onto the inside of the cabinet, access to holes can be got through slots in intermediate slide.Slides should be fitted parallel and screws tightened fully to avoid gaps.Fit inner slide onto the outside of the drawer.Now slide the drawer with inner slide fitted on to the intermediate slides on the cabinet till the latch will automatically engage.

View full product details »