Cut down the template according to your demand, Stick the template on the door and frame
According to the position of the installation template, drill holes to install the screws.
Take off Main Arm and Adjective Arm. Put the arm and the door closer main body in cross shape. Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
According to the drilled holes, install the door closer body on frame or door.
Pre load the arm to an angle and then install it together with the Adjective Arm which is vertical to the door. Adjust the length of the Arm to install the Arm. At last, fasten the screws on the arm.
Put dust proof cap on the other end of the gear shaft
The standard installation
The template of the right hand pull side door vertical installation. (The template of the left hand pull side door vertical installation is opposite of the template of the right hand pull side door vertical installation).
The reverse installation
The template of the left hand push side door vertical installation. (The template of the right hand push side door vertical installation is opposite of the template of the left hand push side door vertical installation).
The steps of parallel installation
According to the mark, fold the parallel installation template to 900. Stick it on the door and frame
According to the position of the installation template, drill screw holes.
According to the drilled holes, install the door closer main body and PA board on the door and door frame. Then fasten.
Take off the bracket of the Adjective Arm, Preload the arm to 450, Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
Adjust the length of the Adjective Arm to install the Arm, make it parallel with door closer main body. Put the clamp cover on the gear of the parallel board. Fasten the assembled screw, then fasten the nut of the link.
Put the dust-proof cap on the other end of the gear shaft.
Adjust the speed of the door closer by:-
The Closing speed regulation valve and latching speed regulation valve.
Counter-clockwise turning can make the speed faster. On the contrary, clockwise turning will make the speed slower.
The parallel installation
The template of the right hand push side door parallel installation (The template of the left hand push side door parallel installation is opposite of the template of the right and push side door parallel installation)
Notices.
Please don't rotate the direction of the square tenon of the gear before install the door closer.
Please don't hit the square tenon of the gear hard when you install the arm.
Door closer can auto-close the door by themselves extra efforts to close the door are not permitted.
Fasten all the screws after half a moth with use.
Pay attention to the speed regulation in the summer and winter seasons.
Please don't screw the regulating valve off main body, when you adjust the speed.
Unique arched hand rest to prevent fatigue while working.
Locks at extended position.
Max. Load 12kgs.
*If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.
Minimum horizontal gap required is 550mm.
Drill as per drilling diagram as in Fig. 1.
Assemble height adjustment brackets on to the slides using M4 screws provided as in Fig. 2.
Height adjustment bracket should be adjusted for desired height.
Screw the mounting bracket 85mm distance from the edge of the table and to other end 255mm & 355mm respectively for 350mm & 400mm slides (Refer Fig. 3)
As per store shipping policy. If you need any other finish please contact our sales team. We can provide almost all kind of finishes. Customized orders may take up to 25 days for Dispatch and are Non Returnable.
Designed for cabinets having blind corner panel. Max opening 105º Max shutter size 850mm X 550mm (34" X 22") for 2 hinges. Shutter thickness 16mm to 19mm. 3 way adjustment with system 32 compatibility. Finish - Nickel Plated
Ebco EURO - Slow Motion Hinge with 2 hole Mounting Plate E-HSM Set of 2pcs
Rs. 194.00
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Euro Slo Motion Hinge - Full Overlay with 2 Hole Mounting Plate
E-HSM1
36
Nickel Plated
Euro Slo Motion Hinge - Half Overlay with 2 Hole Mounting Plate
E-HSM2
36
Nickel Plated
Euro Slo Motion Hinge - Inset with 2 Hole Mounting Plate
E-HSM3
58
Nickel Plated
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
