Ebco Full Panel Quick Fit Drawer Slide - 54mm (FPQ54-40-40)

Rs. 521.00

Ebco Full Panel Quick Fit — FPQ54-40-40

Forget wooden drawer sides. The Ebco Full Panel Quick Fit replaces them entirely — a single back panel clips on to complete the drawer, cutting assembly time, reducing material costs, and delivering a cleaner finish every time.

Built for kitchen cabinets, wardrobes, office furniture, and modular interiors.

Ebco Full Panel Quick Fit — Assembled Drawer

Key Features

Quick-Clip Assembly — Clip on the back panel and the drawer is done. No wooden sides needed.
Precision Rollers — Smooth, near-silent operation with every pull, plus front facia adjustment.
Auto-Close — Built-in mechanism pulls the drawer shut with a gentle, controlled action.
Tool-Free Removal — Tilt-and-remove with guided re-insertion. No tools, no fuss.
Front Facia Adjustment — Fine-tune alignment after installation via the front bracket.
System 32 Compatible — Fits the universal modular furniture drilling grid.

Technical Specifications

Model	Height (mm)	Depth (mm)	Width (mm)	Extension (mm)	Max Load (kg)	Finish
FPQ54-40-40	54	400	400	325	25	Ivory

Dimensional Reference

A (mm)	B (mm)	C (mm)	D (mm)
54	71	52	32
86	103	84	64
125	142	123	96

In the Box

Installation Notes

Step 1 — Side Gap & Panel Dimensions (Fig. 1)
Allow a 15.5 mm side gap per side — the full panel serves as the drawer side. Refer to the A/B/C/D dimensional table above for panel sizing by height.

Fig. 1 — Front View: 15.5mm side gap and A/B/C/D dimensions

Step 2 — Top Clearance & Auto-Close Offset (Fig. 2)
Maintain a 25.4 mm (1") clearance from the drawer’s top edge to allow tilt-and-remove. Offset the fixed slide by 2 mm to activate auto-closing. Recess all screw heads to avoid interference.

Fig. 2 — Side View: 25.4mm top clearance and 2mm auto-close offset

Step 3 — Mount Fixed Slides & Attach Rear Panel (Fig. 3)
Fit fixed slides inside the cabinet, parallel and at equal heights. For 86 mm and 125 mm panels, use the eccentric cam for front facia height adjustment (6 mm bottom track). Insert the rear panel into the side panels through the key slot provided.

Fig. 3 — Rear panel insertion into side panels via key slot

Step 4 — Assemble & Insert Drawer Unit (Fig. 4)
Place the bottom flap through the track in the side panels. Fix the front facia with the bracket, then slide the assembled drawer unit onto the fixed slides inside the cabinet until it clicks into place.

Fig. 4 — Bottom flap and front facia assembly

FAQs

What’s in the pack? — 2 pairs (4 slides), enough for 2 complete drawers.

What’s the load capacity? — Up to 25 kg per drawer.

What drawer size does this fit? — 400 mm depth × 400 mm width, with 325 mm extension.

Is it System 32 compatible? — Yes, fully compatible.

Can the drawer be removed without tools? — Yes, tilt-and-remove with guided re-insertion.

What finish is available? — Ivory.

Ebco Livsmart End Cap 1935

Aluminium profile shutter handle - 1935 End cap
Ergonomically designed for better grip.
Specially designed for wardrobe drawer and kitchen drawer applications.
Compatible for 18mm board.
Available in 4 finishes to suit your interior

Specification
Shipping

	Specification
Item	Item Code	Size (mm)	Finish
End Cap SH1935	EC-1935-CP	20x35	Chrome Plated
End Cap SH1935	EC-1935-AG	20x35	Anodized Gold
End Cap SH1935	EC-1935-BA	20x35	Brushed Aluminium
End Cap SH1935	EC-1935-SF	20x35	Special Finish
End Cap SH1935	EC-1935-SL	20x35	Silver