Ebco Smart Lift Table Legs-Manual SLTL1-M

Ebco Articulated K.B Station - Platfrom (Without Mouse Tray) Soft Pad AKS1

Rs. 1,892.00

• Specification
• Fittings Instructions
• Shipping

• SPECIFICATIONS

  1. Articulated Keyboard station with 360° swivel enables user to move keyboard freely as per their sitting posture.
  2. Soft palm rest and a stowaway soft pad provides rest to your wrists while working.
  3. Single knob system enables user to adjust height and tilt angle as required (Tilt angle +10º to -20º).
  4. Spring assisted to help counter balance.
  5. Low profile design for maximum leg room.
  6. Load Capacity: 12 kilograms

   

  Item	Type	Code	Finish
  Articulated Keyboard Station Platform	With Mouse Tray	AKS1	Black Texture

  *If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.

• FITTING INSTRUCTIONS
  1. Fit the retainer plate under the table top leaving 15mm from the front. Fit the stopper bush at the rear end.(Ref. Fig.1) Use pan head wood screws provided.
  2. Fit the keyboard platform with the station assembly (Ref. Fig.2)
  3. Slide the platform assembly into the retainer Plate.(Ref. Fig. 3)
  4. Screw the plastic front stopper onto the front end of the retainer plate.(Ref. Fig.4)
  5. Mouse tray shall be fitted on left or right side which mounting holes are predrilled.(Ref. Fig.5)
  6. Use  to adjust angle, height as well as for storage.

  

• As per store shipping policy. If you need any other finish please contact our sales team. 

View full product details »

Ebco Bottom Mounting Drawer Slides - BMDS

Rs. 174.00

Special Features

1. New smooth silent roller system.
2. Right side pair has lateral guiding.
3. Left side pair has side gap adjustment.
4. Tilt and remove drawer.
5. Stopper to prevent drawer from falling.
6. New "Auto-Closing" feature of drawer.
7. "System-32" Compatible.
8. Ribs provided for strength.
9. Load capability - 20 Kgs.

Fitting Instructions

1. Side gap of 12.7 mm (1/2") per side required (Refer fig. 1).
2. 25.4 mm (1") clearance from top edge of drawer required to tilt and remove drawer (Refer fig. 2).
3. Fixed and moving slide should be equally offset by 2 mm for Auto-Closing (Refer fig. 2).
4. Recess screw heads to avoid interference.
5. A set of slides must be fitted parallel and at same heights to each other.

Finish

1. Ivory
2. Brown
3. Black

View full product details »

Ebco Pro-lift (GAS LIFT) (For Bed Fittings)

Rs. 860.00

• Specification
• Fitting Instructions

• Specification

  Specification
  Finish	Silver
  Pcs./set	Pair

  *If you have any specific question related to the product, please contact us.

• 1. Fit the Fix Brackets on bed frame as per given dimension. (Ref. Fig.1) without the gas spring fitted.
  2. Now fix the bed platform to the top brackets. (Ref. Fig.2).
  3. Lastly fit gas spring as shown in diagram (ref. Fig.3).

  *Special Note:

  Installation dimension are only recommendation and will vary depending on type of construction design.

View full product details »

Ebco Bed Clamp BC4 Set of 8pcs

Rs. 176.00

Manufactured out of steel for strength
Clips easily in to each other forming a strong joint
Require four joints to form a bed frame. 

Finish is Zinc Plated.

View full product details »