Door stiffener HD helps to prevent warpage of thin long shutters.
Symmetrical working processes
Can be used in multiples for wider shutters
Use two sets when door width is more than 600mm
For door thickness 15mm and more
For door height 1000mm ~ 2700mm
Item
Code
Size (mm)
Finish
Door Stiffener HD
DSTF2-HD
2010
Grey
Fitting Instructions
1. Slotting dimension requirement Use two sets when door width is more than 600mm
2. Straightener length cutting specification (When door height is 1000-2200mm）
3. Put nut into the straightener, and then adjust the and put it into the slot. Locking screws at both ends of straightener, screws shall be of same height.
4. Tighten the regulator with screws, and lock the plastic decorative covers with screws at the same time.
5. Use the rob to align the door until it is straight, put the decorative cover onto to the regulator.
Ebco EURO - Slow Motion Hinge 4 hole Mounting Plate
Rs. 195.00
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Euro Slo Motion Hinge - Full Overlay with 4 Hole Mounting Plate
E-HSM1-M1
36
Nickel Plated
Euro Slo Motion Hinge - Half Overlay with 4 Hole Mounting Plate
E-HSM2-M1
36
Nickel Plated
Euro Slo Motion Hinge - Inset with 4 Hole Mounting Plate
E-HSM3-M1
58
Nickel Plated
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
Ebco EURO - Slow Motion Hinge with 2 hole Mounting Plate E-HSM1
Rs. 213.00
SPECIFICATIONS:-
Item
Code No
A'mm
Finish
Euro Slo Motion Hinge - Full Overlay with 2 Hole Mounting Plate
E-HSM1
36
Nickel Plated
Euro Slo Motion Hinge - Half Overlay with 2 Hole Mounting Plate
E-HSM2
36
Nickel Plated
Euro Slo Motion Hinge - Inset with 2 Hole Mounting Plate
E-HSM3
58
Nickel Plated
FITTING INSTRUCTIONS
Drill out the cavity in the shutter as per the dimensions in Fig.1. Use 'ebco' Drilling jig. Do not chisel.
Fit the cap into the shutter cavity and screw on the hinge at right angle to the edge of the shutter. The hinges must not be hammered.
Mark hole in the cabinet for mounting plate as per Fig.2. and screw on the mounting plate.
Now, align the shutter with the cabinet, slip-on and screw the hinge on to the mounting plate. Any play or gap in cabinet can be adjusted in the bracket.
By loosening the bracket screws, the shutter can slide horizontally and also be pivoted for varying pressure.
*If you have any specific question related to the product & if you want to buy Sold Out products, please contact us.
Overview
Table top edge mounting with single arm.
No drilling of holes required.
Height adjustment of 100mm.
Compatible for VESA 75 x 75 & VESA 100 x 100 with an extra plate.
Die cast for good aesthetics.
Can be rotated towards left & right as well as tilted up & down with a single knob.
Load capacity:<7 kilograms
FITTING INSTRUCTIONS
Clamp the vertical pole onto the edge of the table as shown in Fig.1.
Clip the height adjustment clip onto one of the holes on the vertical pole, & slide the diagonal arm on to the pole from top till the bottom face of the arm rests on the height adjustment clip, as shown in Fig.2.
Assemble the other parts as shown in Fig.3.
For VESA 100mm model screw the 100mm plate to hanging bracket with M4 screws as shown in Fig.4.
Screw the flat screen to the hanging bracket with M4 screws provided as shown in Fig.5.
Insert the monitor cables into the arm clip & wire holder, then clip them to the diagonal arm & vertical pole respectively as shown in Fig.6.
As per store shipping policy. If you need any other finish please contact our sales team.
The Ebco Folding Table Mount is a versatile and easy-to-use mounting system that allows you to create a foldaway table in any room. The mount is made of durable steel and features a heavy-duty hinge that can support up to 70 kilograms. The table top can be made from any material, including wood, glass, or laminate.
Here are some of the features of the Ebco Folding Table Mount:
Durable steel construction
Heavy-duty hinge
Supports up to 70 kilograms
Easy to install
Perfect for folding & storing tables
Ideal for square or round tables
Compatible for Ø76mm pipe
Aluminium lever for strength
'System 32" Compatible
Easy to fit & use
Folding table mechanism
The Ebco Folding Table Mount is a great way to create a foldaway table in any room. It is easy to install and can support a lot of weight. The mount is also compatible with any table top material, so you can use it to create a table that fits your needs.
Here are some of the benefits of using the Ebco Folding Table Mount:
Saves space: When the table is not in use, it can be folded up and stored away, saving space.
Convenient: The table can be folded out and put away quickly and easily, making it convenient for use in small spaces.
Durable: The mount is made of durable steel and can support a lot of weight, making it a long-lasting investment.
Versatile: It is compatible with any table top material, making it a versatile option for any home.
If you are looking for a way to create a foldaway table in your home, the Ebco Folding Table Mount is a great option. It is easy to install, durable, and versatile.
