EBCO 135° Glass to Glass Connector

Rs. 380.00

• 90°Glass to Glass Connector GC1-90D-p
• 90°Glass to Glass Connector GC1-90D-s

1. Finish: Polish Steel, Brush Steel.

View full product details »

EBCO 135°Wall to Glass Connector

Rs. 264.00

View full product details »

EBCO Sliding Glass Door Lock-Glass to Glass-SS304

Rs. 1,446.00

• Sliding Glass Door Lock-Glass to Glass(SGDL1-GG)

View full product details »

EBCO Sliding Glass Door Lock-Glass to Wood-SS304

Rs. 1,110.00

• Sliding Glass Door Lock-Glass to Wood(SGDL1-GW)

View full product details »

EBCO Openable Glass Door Lock-Glass to Wood-SS304

Rs. 1,350.00

• Openable Glass Door Lock-Glass to Wood(OGDL1-GW)
• Pcs./Set- Set

View full product details »

EBCO Openable Glass Door Lock-Glass to Glass-SS304

Rs. 1,560.00

• Openable Glass Door Lock-Glass to Glass  OGDL1-GG
• Openable Glass Door Lock-Glass to Glass with knob  OGDL2-GG 

View full product details »

EBCO Glass Door Handle "A" Type

Rs. 1,158.00

• Specification
• Product Overview
• Application

• Specification	Glass Door Pull Handle
  Size (mm)	Dia.22mm x 200mm Dia. 22mm x 300mm
  Finish	Brush Steel
  Builders Hardware Product Type	Glass Door Pull Handle

• EBCO Glass Door Pull Handle. This designer Glass Door Pull Handle is available in  Brush steel of two sizes 300mm & 450mm respectively. We offer a variety of door handles manufactured using superior quality raw material (stainless steel). So you can choose from a wide range of varieties of Pull Handles that can be used with Glass Doors .
• Great Handle for Glass Doors. Can be used as Pull Handle for glass doors in your home. Pre-drilling is not recommended. All installation hardwares are included in the package. Installation of this Door Hardware is simple and quick. Sold for a set of 2. Can be used as Back-to-Back Handle. Buy two sets if you have two doors. 

View full product details »

EBCO 900mm Bottom Patch(With Lock) DPF2-03

Rs. 3,252.00

• 900mm Bottom Patch(With Lock) DPF2-03
• Pcs./Set- Each.

View full product details »

EBCO 900mm Top Patch DPF2-04

Rs. 2,295.00

• 900mm Top Patch DPF2-04
• Pcs./Set- Each.

View full product details »

EBCO Double Connector Patch DPF3-04

Rs. 914.00

• Double Connector Patch DPF3-04
• Double Connector Patch DPF3-04-BL
• 
  

View full product details »

EBCO Quad Connector Patch DPF3-03

Rs. 1,706.00

• Quad Connector Patch DPF3-03
• Pcs./Set- Each.

View full product details »

EBCO Over panel Patch with Plate DPF1-03

Rs. 1,138.00

•  Over panel Patch with Plate DPF1-03
• Pcs./Set- Each.

View full product details »

EBCO Corner 'L' patch without Pivot DPF3-02

Rs. 1,022.00

• Corner 'L' patch without Pivot DPF3-02.
• Corner 'L' Patch without Pivot DPF3-02-BL

View full product details »

EBCO Strike patch for Center Lock DPF2-02

Rs. 928.00

• Center Lock DPF2-02

View full product details »

EBCO Corner 'L' Patch With Pivot DPF1-04

Rs. 1,466.00

• Corner 'L' Patch With Pivot.

View full product details »

EBCO Floor Spring Door Accessories Top Pivot DPF4-02

Rs. 208.00

EBCO Floor Spring Door Accessories Top Pivot DPF4-02

• EBCO Floor Spring Door Accessories Top Pivot DPF4-02.
• Top receiver pivot for wooden or ceiling installation.

View full product details »

EBCO Floor Spring Door Accessories Bottom Pivot DPF4-01

Rs. 982.00

EBCO Floor Spring Door Accessories Bottom Pivot DPF4-01

• EBCO Floor Spring Door Accessories Bottom Pivot DPF4-01.
• To be used directly on the floor without floor spring.

View full product details »

EBCO Floor Spring Door Accessories DFS-A2

Rs. 534.00

EBCO Floor Spring Door Accessories DFS-A2

• EBCO Floor Spring Door Accessories DFS-A2
• Designed for both side openings.
• Easy accessible and easy installation.

View full product details »

EBCO Floor Spring (DFS- 250)

Rs. 6,508.00

EBCO Floor Spring -250

1. Built in pressure release valve prevents damage or oil leakage caused by excessive force or strong winds.
2. Designed for both side opening or left or right hand in single side opening.
3. Special low temperature hydraulic oil is used to ensure normal working even at temperature 40° below 0°.
4. For door settings, a built in adjustment of 5mm for length & width is provided.
5. There is also a 2° vertical angle adjustment provided.
6. Opening angle - 90°
7. Unit size - About 6.5kg
8. Container Size - Length - 308 mm,Width -  108 mm ,Height - 42 mm.
9. Finish - Brushed Steel.

View full product details »

EBCO Door Closer concealed - DC 1002

Rs. 5,680.00

Special Features:

1. Hold Open facility.
2. Hold open angle150 degree.
3. Latching and Closing speed adjust valve.
4. Right hand and left hand opening door.
5. Door width upto 950 mm.
6. Door weight upto 85kgs.
7. 5, 00,000  cycles tested.
8. Door opening angle of 150 degree max.

• Specification
• Shipping

• Specifications:

  Item Code	Body Size in mm			Hold Open Facility	Fire Rated	Latching and Closing Speed Adjust Valve	Technical Parameter
  	L	W	H				Door Width	Weight
  DC 1002	-	-	-	Yes	Yes	Available	950mm	85kg

• As per store shipping policy.

View full product details »

EBCO Door Closer concealed - DC 1001

Rs. 5,040.00

Special Features:

1. Hold Open facility.
2. Hold open angle 90 degree to 160 degree.
3. Latching and Closing speed adjust valve.
4. Right hand and left hand opening door.
5. Door width upto 950 mm.
6. Door weight upto 65kgs.
7. 5, 00,000  cycles tested.
8. Door opening angle of 180 degree max.

• Specification
• Shipping

• Specifications:

  Item Code	Body Size in mm			Hold Open Facility	Fire Rated	Latching and Closing Speed Adjust Valve	Technical Parameter
  	L	W	H				Door Width	Weight
  DC 1001	-	-	-	Yes	Yes	Available	950mm	65kg

• As per store shipping policy.

View full product details »

EBCO Door Closer - DC301

Rs. 2,778.00

Special Features:

1. Hold open facility.
2. Hold open angle 90 degree to 160 degree.
3. Door opening angle of 180 degree Max.
4. Latching and Closing speed adjust valve.
5. Right hand and left hand opening door.
6. Door width 900 – 1050mm.
7. Door weight 105 kgs.
8. 5, 00,000  cycles tested.

• Specification
• Shipping
• Shipping

• Specifications:

  Item Code	Body Size in mm			Hold Open Facility	Fire Rated	Latching and Closing Speed Adjust Valve	Technical Parameter
  	L	W	H				Door Width	Weight
  DC 301	206	45	67	Yes	Yes	Available	900-1050mm	105kg

• As per store shipping policy.

• The steps of vertical installation

  1. Cut down the template according to your demand, Stick the template on the door and frame
  2. According to the position of the installation template, drill holes to install the screws.
  3. Take off Main Arm and Adjective Arm. Put the arm and the door closer main body in cross shape. Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
  4. According to the drilled holes, install the door closer body on frame or door.
  5. Pre load the arm to an angle and then install it together with the Adjective Arm which is vertical to the door. Adjust the length of the Arm to install the Arm. At last, fasten the screws on the arm.
  6. Put dust proof cap on the other end of the gear shaft

  The standard installation

  The template of the right hand pull side door vertical installation.
  (The template of the left hand pull side door vertical installation is opposite of the template of the right hand pull side door vertical installation).

  The reverse installation

  The template of the left hand push side door vertical installation.
  (The template of the right hand push side door vertical installation is opposite of the template of the left hand push side door vertical installation).

  The steps of parallel installation

  1. According to the mark, fold the parallel installation template to 90⁰. Stick it on the door and frame
  2. According to the position of the installation template, drill screw holes.
  3. According to the drilled holes, install the door closer main body and PA board on the door and door frame. Then fasten.
  4. Take off the bracket of the Adjective Arm, Preload the arm to 45⁰, Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
  5. Adjust the length of the Adjective Arm to install the Arm, make it parallel with door closer main body. Put the clamp cover on the gear of the parallel board. Fasten the assembled screw, Then fasten the nut of the link.
  6. Put the dust-proof cap on the other end of the gear shaft.

  Adjust the speed of the door closer by:-

  1. The Closing speed regulation valve and latching speed regulation valve.
  2. Counter-clockwise turning can make the speed faster. On the contrary, clockwise turning will make the speed slower.

  The parallel installation

  The template of the right hand push side door parallel installation 
  (The template of the left hand push side door parallel installation is opposite of the template of the right and push side door parallel installation)

  Notices.

  1. Please don't rotate the direction of the square tenon of the gear before install the door closer.
  2. Please don't hit the square tenon of the gear hard when you install the arm.
  3. Door closer can auto-close the door by themselves extra efforts to close the door are not permitted.
  4. Fasten the all screws after half a moth with use.
  5. Pay attention to the speed regulation in the summer and winter seasons.
  6. Please don't screw the regulating valve off main body, when you adjust the speed.

View full product details »

EBCO Door Closer - DC 201

Rs. 2,336.00

Special Features:

1. Hold open facility
2. Hold open angle 90 degree to 160 degree.
3. Door opening angle of 180 degree Max.
4. Latching and Closing speed adjust valve.
5. Right hand and left hand opening door.
6. Door width 800 – 950mm.
7. Door weight 85 kgs.
8. 5, 00,000  cycles tested.

• Specification
• Shipping
• Fitting Instructions

• Specifications:

  Item Code	Body Size in mm			Hold Open Facility	Fire Rated	Latching and Closing Speed Adjust Valve	Technical Parameter
  	L	W	H				Door Width	Weight
  DC 201	186	45	67.5	Yes	Yes	Available	800-950mm	85kgs

• As per store shipping policy.

• The steps of vertical installation

  1. Cut down the template according to your demand, Stick the template on the door and frame
  2. According to the position of the installation template, drill holes to install the screws.
  3. Take off Main Arm and Adjective Arm. Put the arm and the door closer main body in cross shape. Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
  4. According to the drilled holes, install the door closer body on frame or door.
  5. Pre load the arm to an angle and then install it together with the Adjective Arm which is vertical to the door. Adjust the length of the Arm to install the Arm. At last, fasten the screws on the arm.
  6. Put dust proof cap on the other end of the gear shaft

  The standard installation

  The template of the right hand pull side door vertical installation.
  (The template of the left hand pull side door vertical installation is opposite of the template of the right hand pull side door vertical installation).

  The reverse installation

  The template of the left hand push side door vertical installation.
  (The template of the right hand push side door vertical installation is opposite of the template of the left hand push side door vertical installation).

  The steps of parallel installation

  1. According to the mark, fold the parallel installation template to 90⁰. Stick it on the door and frame
  2. According to the position of the installation template, drill screw holes.
  3. According to the drilled holes, install the door closer main body and PA board on the door and door frame. Then fasten.
  4. Take off the bracket of the Adjective Arm, Preload the arm to 45⁰, Install the arm on the square tenon of gearing bearing. Then fasten by the assembled screw.
  5. Adjust the length of the Adjective Arm to install the Arm, make it parallel with door closer main body. Put the clamp cover on the gear of the parallel board. Fasten the assembled screw, Then fasten the nut of the link.
  6. Put the dust-proof cap on the other end of the gear shaft.

  Adjust the speed of the door closer by:-

  1. The Closing speed regulation valve and latching speed regulation valve.
  2. Counter-clockwise turning can make the speed faster. On the contrary, clockwise turning will make the speed slower.

  The parallel installation

  The template of the right hand push side door parallel installation 
  (The template of the left hand push side door parallel installation is opposite of the template of the right and push side door parallel installation)

  Notices.

  1. Please don't rotate the direction of the square tenon of the gear before install the door closer.
  2. Please don't hit the square tenon of the gear hard when you install the arm.
  3. Door closer can auto-close the door by themselves extra efforts to close the door are not permitted.
  4. Fasten the all screws after half a moth with use.
  5. Pay attention to the speed regulation in the summer and winter seasons.
  6. Please don't screw the regulating valve off main body, when you adjust the speed.

View full product details »

Ebco Livsmart PVC Skirting 150mm

Rs. 1,752.00

• Specification
• Shipping

• Specification
  Finish	Black,  Silver, White, Grey, Special Finish
  Size	3.65 m

  *If you have any specific question related to the product, please contact us.

• As per store shipping policy.

View full product details »